Search results

This study aims to experimentally investigate the effect of the powder material characteristics on the qualities of the binder jetting additive manufacturing parts both before and after post processing (sintering).

Three different types of the 316L stainless steel powder feedstock with various mean particle sizes and size distributions were studied. The influence of the powder particle size distributions and pore sizes on the powder bed packing densities and on the dynamics of the binder droplet-powder bed interactions were characterized. In addition, the surface roughness and densities of these parts both in the green state and after sintering were studied.

The results revealed the significant role of the powder feedstock characteristics on the liquid binder/powder bed interaction and consequently on the dimensional accuracies of the green parts. It was observed that the parts printed with the smaller mean particle sizes resulted in better surface finish and higher final densities after sintering. Furthermore, the hardness of the sintered parts produced with smaller powder particles exhibited higher values compared to the parts fabricated with the larger particles. On the other hand, larger particle sizes are advantageous for various green part qualities including the dimensional accuracies, green part densities and surface roughness.

This study establishes more comprehensive correlations between the powder feedstock characteristics and various quality criteria of the printed binder jetting components in both green and sintered states. These correlation are of critical importance in choosing the optimal process parameters for a given material system.

In binder jetting, the interaction between the liquid binder droplets and the powder particles defines the shape of the printed primitives. The purpose of this study is to explore the interaction of the relative size of powder particles and binder droplets and the subsequent effects on macro-scale part properties.

The effects of different particle size distribution (5–25 µm and 15–45 µm) of stainless steel 316 L powders and droplet sizes (10 and 30 pL) on part density, shrinkage, mechanical strength, pore morphology and distribution are investigated. Experimental samples were fabricated in two different layer thicknesses (50 and 100 µm).

While 15–45 µm samples demonstrated higher green density (53.10 ± 0.25%) than 5–25 µm samples (50.31 ± 1.06%), higher sintered densities were achieved in 5–25 µm samples (70.60 ± 6.18%) compared to 15–45 µm samples (65.23 ± 3.24%). Samples of 5–25 µm also demonstrated superior ultimate tensile strength (94.66 ± 25.92 MPa) compared to 15–45 µm samples (39.34 ± 7.33 MPa). Droplet size effects were found to be negligible on both green and sintered densities; however, specimens printed with 10-pL droplets had higher ultimate tensile strength (79.70 ± 42.31 MPa) compared to those made from 30-pL droplets (54.29 ± 23.35 MPa).

To the best of the authors’ knowledge, this paper details the first report of the combined effects of different particle size distribution with different binder droplet sizes on the part macro-scale properties. The results can inform appropriate process parameters to achieve desired final part properties.

This study aims to investigate the material extrusion additive manufacturing (MEAM) deposition parameters for creating viable 3-D printed polyvinylidene fluoride (PVDF) structures with a balanced mix of mechanical and electrical properties.

Different combinations of deposition conditions are tested, and the influence of these parameters on the final dimensional accuracy, semi-crystalline phase microstructure and effective mechanical strength of MEAM homopolymer PVDF printed parts is experimentally assessed. Considering printed part integrity, appearance, print time and dimensional accuracy, MEAM parameters for PVDF are suggested.

A range of viable printing parameters for MEAM fabricated PVDF Kynar 740 objects of different heights and in-plane length dimensions was determined. For PVDF structures printed under the suggested conditions, the mechanical response and the microstructure development related to Piezoelectric response are reported.

This research first reports on a range of parameters that have been confirmed to facilitate effective MEAM printing of 3-D PVDF objects, presents effects of the individual parameters and gives the mechanical and microstructure properties of PVDF structures fabricated under the suggested deposition conditions.